Revised Application technology cold grinding in the Food & Beverages sector

Cold Grinding

Using the entalphy of gases in adapted mills for food grinding but also plastics, rubber and electronic scrap

GAS APPLICATION

During mill cooling, liquid nitrogen or carbon dioxide is sprayed directly into the grinder which lowers the temperature. By suppressing the heat generated during grinding, this cooling technique ensures stable performance of the process and increases the quality of the milled product.

A product cooler freezes materials rich in oil or fat. From the feed container, the material to be ground is passed by means of a metering screw into the paddle screw cooler. Here it is cooled by sprayed liquid nitrogen and passes together with the nitrogen into the mill. This simultaneously cools the crushing process in the mill. Special temperature control and a liquid nitrogen control valve unit regulate the amount of nitrogen required to reach a defined temperature.

Advantages:

  • Good grindability of products with a high proportion of oils, fats and moisture
  • The material remains free-flowing; the machine does not clog up
  • No thermal damage through overheating of temperature-sensitive substances
  • The essential oil content remains almost unchanged and intact

 

MESSER SOLUTION


The Messer Group operates a highly specialised test facility, which offers the opportunity to profit from process developments, estimate production costs or produce sample batches. Qualified sample grinding is carried out using liquid nitrogen. All grinding parameters, such as throughput, electricity and nitrogen requirements, as well as the particle size distribution are measured, evaluated and made available to the customer. The results obtained can be transferred to large-scale production.

In addition to purely producing grinding samples, this also allows an estimation of production costs under production conditions and a comparison to other grinding processes. 

Customers’ existing mills can also be optimised. Granulate coolers, nitrogen control valves and temperature control can be provided for carrying out tests on these plants on site.   

 

 Nutmeg, before and after cryogenic grinding

Asset Publisher

Customer processes

Application proposal Trials

TRIALS

Small scale development center trials - Customer onsite trials

Contact form for every page

Contact us

select action

Form

Action form

Mr.
By clicking I accept the GDPR policy of the Messer Group. This agreement can be revoked at any time