Revised Application technology hearth furnace in the Glass & Minerals sector

Hearth furnace with gases

Lowering emissions, increasing production with tailormade oxygen applications

GAS APPLICATION

In addition to traditional natural air-gas combustion, a significant number of furnaces use oxy-fuel combustion (mainly in Italy and recently in Turkey), accounting for about 30% of the total furnaces in Europe. The enrichment of combustion air with variable amounts of oxygen, in order to provide a higher temperature in the melting furnace and, eventually, increase the production rate, is widely used particularly in Spain. Oxy-fuel fired furnaces show lower energetically values. Due to decreasing pollution levels most of the new furnaces are operated by oxyfuel. Reasons for oxygen enhanced combustion are:

 

  • The nitrogen is eliminated from the combustion process
  • Exhaust gas volume reduced by 75%
  • Less heat loss through the exhaust system
  • Less batch loss by the lower exhaust velocity, less dust emission
  • Flue gas channel area can be reduced
  • Higher flame temperature
  • Better heat transfer by the 3 atom molecules taking place in the combustion
  • Better heat distribution
  • Higher pull rate (up to >200%)
  • Oxygen enrichment
  • In the combustion process of the hearth furnace, the supplied oxidizing agent can be enriched with oxygen, whereby the flow rate of oxygen as a function of exhaust gas temperature and / or other process parameters are specifically controlled.

Oxyfuel combustion

Air-fuel burners are replaced by oxyfuel burners using pure oxygen. Additionally oxyfuel burners are used to regulate the heat of the flow stream. Converting these furnaces to oxy-fuel results in:

  • Substantial capacity increase (up to double)
  • Better product quality
  • Lower emission values


MESSER-SOLUTION


Examples for the enhancements of capacity and the reductions of emissions in the case of a hearth furnace are shown in the table below. The data is derived from a frit production unit in which recuperative air-fuel burners were replaced by oxyfuel burners of the Oxipyr-type.

Revised Customer process hearth furnace in the Glass & Minerals sector

Hearth furnace

Production of frit and pigment

Contact form for every page

Contact us

select action

Form

Action form

Mr.
By clicking I accept the GDPR policy of the Messer Group. This agreement can be revoked at any time

Contact form for every page

Contact us

select action

Form

Action form

Mr.
By clicking I accept the GDPR policy of the Messer Group. This agreement can be revoked at any time